150 lb. & 250 lb.
- For installation of pocket or bi-parting doors up to 4´ wide, 1˝ to 1-3/8˝ thick panels weighing up to 150 lbs. each and up to 8´ high.
- Heavy gauge, steel stiffener reinforces split jambs.
- Four large 1˝ wheels for easy rolling action.
- Easy to install feature makes installation a ˝snap˝ .
- Supports panels weighing up to 150 lbs.
- Easy adjustment after installation.
- V-groove jump proof aluminum track.
- Opening width equals door width multiplied by 2, add 2˝.
- For Bi Part: Sum of 2 doors multiplied by 2, add 2”.
- For 6´8˝ Door: Height equals 84 1/2” from finished floor.
- For 7´0˝ Door: Height equals 88 1/2” from finished floor.
- For 8´0˝ Door: Height equals 100 1/2” from finished floor.
- Built-Ups can be ordered in 6´8˝, 7´8˝, or 8´0˝ door height.
- PDFC150N conforms to ANSI A156.14 type D8681
- Cross Reference: Stanley 1750, Cox 15-200, Grant 7000 Series, Hager 9601/9701, Johnson 100, Lawrence 506/580 Track, Sterling 1601 Series.
- 250 lb. heavy duty hardware has four large 1˝ ball bearing wheels for easy rolling action.
- Support panels weighing up to 250 lbs.
150 lb. & 250 lb.
- For installation of pocket or bi-parting doors up to 3˝ width, weighing up to 150 lbs. each and up to 8´ high
- Heavy gauge, wrap around steel stiffener reinforces split jambs
- Four large 1˝ wheels for easy rolling action
- Easy-to-install feature makes installation a “snap”
- Supports panels weighing up to 150 lbs.
- Cut marks on header make for easy sizing
- Easy adjustment after installation
- Cut marks on header make for easy sizing
- Non-handed steel header brackets for easy leveling of header assembly
- V-Groove jump proof aluminum track
- Opening width equals door width multiplied by 2, add 1˝
- For Bi Part: Sum of 2 doors multiplied by 2, add 1/4˝
- Kits are sized for 3´0˝ door width and can be cut shorter at installation
- For 6´8˝ Door: Height equals 84 1/2˝ from finished floor
- For 7´0˝ Door: Height equals 88 1/2˝ from finished floor
- For 8´0˝ Door: Height equals 100 1/2˝ from finished floor
- For 9′ 0″ Door: Height equals 112 1/2″ from finished floor
- Kits are sized for 6´8˝, 7´0˝, or 8´0˝ door height and can be cut shorter at installation
- PDFC150N conforms to ANSI A156.14 type D8671 Cross Reference: Stanley 735/40-3925R/40-3940, Crowder Crowderframe, Hager 9630/9631, Johnson 1500, Sterling 1630
- 250 lb. heavy duty hardware has four large 1˝ ball bearing wheels for easy rolling action.
- Supports panels weighing up to 250 lbs.
